- Overview
- Reviews
Overview
- This charger is intended for the Li-Po battery.
- Uses the SMPS for power when charging thus it must be accompanied with the SMPS 12V 5A.
- Support 2S and 3S Cell charge. (Exception does not charge simultaneously)
|
LIPO Battery Charger LBC-010 |
1 |
|---|
* Battery and SMPS 12V 5A sold separately.
| Input Voltage | 10 ~ 18V |
|---|---|
| Output Voltage |
2S Cell: 8.4V 3S Cell : 12.6V |
| Output Current | 1.1A |
| Status |
RED LED : Charging GREEN LED : Charge Complete BLINKING RED LED : Bad Battery Connection |
LIPO 11.1V Battery Set LB-010 LB-011 LB-012
- Do not apply heat water or any other liquid on the battery.
- Do not take the battery apart.
- Do not use damaged batteries. (inflated deformed damaged etc.)
- Do not charge 2S and 3S Cell together at once.
- When charging make sure the battery is connected into the correct polarity.
- Do not charge when the battery is hot. Please charge after it has cooled off.