HN13-I105 Set

Features Idler Bearing Set for Dynamixel XW540 Series.This idler bearing is connected to the opposite side of the output shaft of DYNAMIXEL and can be used to assemble the hinge frame on it.Patented hollow structure enables this set to be assembled...

HN13-N105 Set

Features HN13-N105 is the standard horn set for Dynamixel XW540 models. This horn set can be assembled on the output shaft wheel gear of Dynamixel  in order to assemble with frames such as a hinge or an adapter. Package Components HN13-N1051Wrench...

Robot Cable-WP 1000mm (Extension Cable)

Features **This cable is for DYNAMIXEL XW-Series version only**This is the waterproof connector to waterproof connector set for Dynamixel XW-series. Package Components Robot Cable-4P-XW 1000mm Extension1 Compatible Products ...

Robot Cable-WP 1000mm (Basic Cable)

Features **This cable is for DYNAMIXEL XW-Series version only**This is the waterproof Connector to RS-485 4P cable set for Dynamixel XW-series. Package Components Robot Cable-4P-XW 1000mm1 Compatible Products XW540-T260-RXW540-T140-R

X540-150 Gear/Bearing Set

Features Gear set for Dynamixel XH540/XM540 – Gear Ratio: 150 : 1 Can be replaced directly when existing gears are worn out. Made with metal and specially coated to strengthen endurance and durability of abrasion. Exclusive magnet for non-contact...

X540-270 Gear/Bearing Set

Features Gear set for Dynamixel XH540/XM540 – Gear Ratio: 270 : 1 Can be replaced directly when existing gears are worn out. Made with metal and specially coated to strengthen endurance and durability of abrasion. Exclusive magnet for non-contact...

CM-550

Features CM-550 is a controller that includes a MCU DYNAMIXEL TTL Communication board BLE Slave communication module Gyro Accelerometer Temperature sensor Buzzer RGB LED Sensor ports MIC etc. BLE slave module is included.With Micro USB Port it can...

FRP42-H121K Set

Features Optional Aluminum Hinge frame for DYNAMIXEL-P(PH42-020-S300-R). Has high strength due to metal processing and therefore it does not bend or break easily  Package Components FRP42-H121K (Black)1Wrench Bolt WB M3x820 Caution Idler...

Pi-Camera Frame Set

Feature This frame is used to mount the Raspberry Pi Camera onto the TurtleBot3 or OpenManipulator. Screws required to mount on the camera and robot are included in the package.  Package Components Pi-Camera Frame1PHS M2.5x125PHS M2x65NUT M2.55NUT...

DYNAMIXEL Shield

Feature  - Used to control the Dynamixel using the Arduino board.  - Mounts above the Arduino board and can be used with the OpenCR controller - Various shields can be stacked on the Dynamixel Shield  - Comes with JST type connectors and XL-320...

CM-100A

This controller is used in OLLO and can connect other products such as the geared motor box, servo motor, touch sensor, LED module, IR Sensor, etc. Create a task code for control using RoboPlus Task and use it to control the movements. The...

Phillips Screw Drive SD-01

Phillips Screw Driver SD-01   ** DESCRIPTION  -         Can tighten or loosen the screws when building Bioloid robots   ** INCLUDES  - Phillips Screw Driver SD-01 : 1 set   **...

BT-410 Dongle

Features -BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low Energy interface (master function).-That is if you connect BT-410 dongle to the PC it can be paired with BT-410 Slave module to exchange data (1:1 communication)...

L-Rivet Set (RS-70)

12mm Rivet Set for use with PLAY 600, 700 & OLLO Series   Components Quantity Frame Black Single Rivet 10 pcs White Single Rivet  10 pcs Green Single Rivet 10 pcs Blue Single Rivet 10 pcs Yellow Single...

Robot Cable-X3P 180mm (Convertible) (10pcs)

Features This is the TTL communication 3P cable set for Dynamixel X-series.New style JST connector is applied on one side of the cable while old style Molex connector is applied on the other side.This cable is used when connecting Dynamixel X-series...

BT-210 Set

Features The BT-210 is a product that uses Bluetooth communication to enable serial communication (UART).The BT-210 covers the circuit with a case to protect it and it uses a connector-type cable to install on a robot and RC-100B. You can control your...

Robot Cable-X4P 180mm (Convertible) (10pcs)

Features This is the RS-485 communication 4P cable set for DYNAMIXEL X and P-series. New style JST connector is applied on one side of the cable while old style Molex connector is applied on the other side. This cable is used when connecting DYNAMIXEL...

CM-150

[902-0103-000] CM-150     ? Description   -  The CM-150 controller is used with ROBOTIS DREAM, and various DREAM parts   (geared motor, servo motor, touch sensor, LED module, IR sensor, etc.) can be connected to it...

U2D2

Features U2D2 is a small size USB communication converter that enables to control and to operate the DYNAMIXEL with the PC.  It is smaller than the previous model and has mount holes to make it easier to install on robots.  It uses the USB...

Robot Cable-3P-Sync 160mm 5pcs

[903-0232-000] Robot Cable-3P-Sync 160mm 5pcs   ? DESCRIPTION - 3P sync cable set for using dual joint mode in Dynamixel models that support the mode. - Has strong coating to withstand ripping.   Dual Joints Dual joints are used as 1 joint by...

Tool (STL)

Features This part is used to combine and detach rivets. Package Components STL(Black)1 Compatible Products DREAM Level 1~5 SMART Level 1~4

BT-410

Features BT-410 is a device that enables serial communication (UART) via Bluetooth communication.BT-410 has a case that protects the circuits and a connector-type cable that is used to connect the device onto the robot.Used with smart phone tablet PC...

Robot Cable 3P-XL 160mm (5pcs)

Robot Cable 3P-XL 130mm (5pcs)

Features 3P cable set exclusive for DYNAMIXEL XL-320.Has strong coating to withstand ripping.Easily bendable for easy wire arrangement and holding. Package Components 3P CABLE 130mm(XL-320)5 Compatible Products DYNAMIXEL : XL-320Controller :...