DYNAMIXEL Starter Set [US]

Features *The DYNAMIXEL Starter Set does not include DYNAMIXEL unit. *Please select the right DYNAMIXEL for your project by referring to our DYNAMIXEL Selection Guide (Hyperlink) The DYNAMIXEL Starter Set is ROBOTIS` recommendation for all first-time...

Li-ion Battery 3.7V 2600mAh LB-041

Features Lithium-ion rechargeable battery.PCM is incorporated to protect the battery from overcharge discharge and excessive current. Battery cover (blue) included for safety. Package Components Li-ion Battery 3.7V 2600mAh LB-0411 * Battery...

LIPO Battery 11.1V 1300mAh LB-020

Features This LiPo battery is intended for Engineer Kits. PCM is incorporated to protect the battery from overcharge discharge and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO Battery 11.1V 1300mAh...

Li-ion Battery Charger Set LBB-041

Features - This charger is intended for the ROBOTIS Li-ion Battery 3.7V 1300mAh LB-041 rechargeable battery.- Uses 6mm rivets (ROBOTIS DREAM/MINI) to install onto robots.- Can be used as a frame to attach the battery onto robots.- Charging : RED LED...

SMPS2Dynamixel

Features This device provides power from the SMPS to the DYNAMIXEL.Connect the SMPS to the DC terminal and connect the DYNAMIXEL using the cable.3P connector for AX series and 4P connector for DX/RX/EX series are mounted on the SMPS2Dynamixel. The...

Li-ion Battery 3.7V 1300mAh LB-040

LIPO Battery 11.1V 1800mAh LB-012

Features PCM is incorporated to protect the battery from overcharge discharge and excessive current.Lithium Polymer rechargeable battery for the ROBOTIS OP series. Cannot be used for PREMIUM/GP because the connector and size differs.Can be recharged...

SMPS 12V 5A PS-10 [US-110V]

Features Power supply and battery charging device.Used to power the robot or charger. Package Components SMPS 12V 5A PS-10 1AC Cord                     1 H/W Specifications Output12V 5ASupply Voltage100 ~ 260V AC (Free Voltage) Compatible...

LIPO Battery Charger LBC-010

Features - This charger is intended for the Li-Po battery.  - Uses the SMPS for power when charging thus it must be accompanied with the SMPS 12V 5A.- Support 2S and 3S Cell charge. (Exception does not charge simultaneously) Package Components ...

LIPO Battery 11.1V 1000mA LB-010

Features This LiPo battery is intended for robots. PCM is incorporated to protect the battery from overcharge discharge and excessive current.Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V Battery LB-0101Battery...

LIPO Battery 11.1V 1000mAh LB-011

Features PCM is incorporated to protect the battery from overcharge discharge and excessive current.Lithium Polymer rechargeable battery for the ROBOTIS OP series. Cannot be used for PREMIUM/GP because the connector and size differs.Can be recharged...